Bently Nevada 3500/15 Power Supply 3500/15-05-05-00 106M1079-01

The 3500 Power Supplies are half-height modules and must be installed in the
specially designed slots on the left side of the rack. The 3500 rack can contain
one or two power supplies (any combination of ac and/or dc) and either supply
can power a full rack. If installed, the second supply acts as a backup for the
primary supply. When two power supplies are installed in a rack, the supply in
the lower slot acts as the primary supply and the supply in the upper slot acts as
the backup supply. Removing or inserting either power supply module will not
disrupt operation of the rack as long as a second power supply is installed.

The 3500 Power Supplies accept a wide range of input voltages and converts
them to voltages acceptable for use by other 3500 modules. Three Power Supply
versions are available with the 3500 Series Machinery Protection System as
follows:
• AC Power
• High Voltage DC Power Supply
• Low Voltage DC Power Supply

Ordering Information
3500/15-AXX-BXX-CXX

3500/15 3500 POWER SUPPLY
127610-01 AC Power Supply Module
125840-01 High voltage AC PIM
125840-02 Low Voltage AC PIM

106M1079-01 UNIVERSAL 85-264 VAC POWER SUPPLY
106M1081-01 UNIVERSAL 85-264 VAC PIM
113M0744 UNIVERSAL 85-264 VAC AC PIM REPLACEMENT FUSE
102M3992 REPLACEMENT CONNECTOR FOR UNIVERSAL AC PIM AND CURRENT DC PIMS

Company Introduction

Great System In.(GSI) a name synonymous with Process Control Instrumentation and Electrical and Instrument and Solution Provider have established themselves as a Quality Leader since its inception in 1998 based at Hong Kong ( China ).

Great System In.(GSI) a name synonymous with Process Control Instrumentation and Electrical and Instrument and Solution Provider have established themselves as a Quality Leader since its inception in 1998 based at Hong Kong ( China ).

For more than 25 years, we have successfully executed many prestigious orders by supplying Sophisticated Electronic Instruments and Control Systems and HT Panel and LT and Panel. Indigenization of the instruments of our product range have been in hand with our commitment to the manufacture of safe, reliable and quality instrument. Our thrust today is in the field of microprocessor based instrumentation and control systems. A knowledge inspiring and skilled arena that we are in, we are staffed to meet the dictates of the field and thus can provide various control and monitoring software packages for Instrumentation and control.

Application Gallery

Power : Feed Water (Drum Level & DP across Drum Level), Furnace Vacuum, SH Steam Temp Stage I & II (L&R), Dearator Level, Condenser Hotwell Level and REC, HP Heater Level, LP Heater Level, Gland Seal Steam Pressure, Gland Steam Temperature, Thermal Load, FD, PA and Vapor Fan Control

Oil & Gas : Platform & Pipeline, Catalytic Cracking, Distillation Columns, Blending, Reactors

Pulp & Paper : Stock Preparation, Chest Box, Bleaching

Mining : Ore Dressing, Pyro/Hydro Processing, Electrolytic Refining, Crushers, Ball Mills, Classifiers, Filters, Flotation Devices, Magnetic Separators, Calcining Kilns, Digesters, Evaporators

Food & Beverages : Evaporators, Blending & Batching, Fermenting

Steel : Blast Furnaces, Continuous Casting, Reheating Furnaces, Biological Waste Treatment, Annealing Lines Sintherization

Water & Waste Water : Filter Backwash, Chemical Feed, Clear well Level, Finished Water Pumping, Remote Workstation Monitoring, Sludge Process, Sequencing Batch Reactor Plants, Rotating Biological Contactor Plant, Sludge Dewatering, Incinerator Control, Return and Waste activated sludge pumping